BezierCurveBase Class
Base class for CurvePrimitive (necessarily 3D) with _polygon.
- This has a Bezier1dNd polygon as a member, and implements dimension-independent methods
- This exists to support
- BezierCurve3d -- 3 coordinates x,y,z per block in the Bezier1dNd poles
- BezierCurve3dH -- 4 coordinates x,y,z,w per block in the Bezier1dNd poles
- The implementations of "pure 3d" queries is based on calling
getPolePoint3d. - This has the subtle failure difference that
getPolePoint3dcall with a valid index on on a 3d curve always succeeds, but on 3dH curve fails when weight is zero.
Extends
Extended by
Methods
| Name | Description | |
|---|---|---|
| constructor(blockSize: number, data: Float64Array): BezierCurveBase Protected | ||
| allocateAndZeroBezierWorkData(primaryBezierOrder: number, orderA: number, orderB: number): void Protected | set up the _workBezier members with specific order. | |
| clone(): BezierCurveBase Abstract | Return a deep clone. | |
| clonePartialCurve(fractionA: number, fractionB: number): BezierCurveBase | Return a curve primitive which is a portion of this curve. | |
| cloneTransformed(transform: Transform): BezierCurveBase | Return a transformed deep clone. | |
| computeStrokeCountForOptions(options?: StrokeOptions): number | Assess length and turn to determine a stroke count. | |
| constructOffsetXY(offsetDistanceOrOptions: number | OffsetOptions): undefined | CurvePrimitive | CurvePrimitive[] | Construct an offset of the instance curve as viewed in the xy-plane (ignoring z). | |
| copyPolesAsJsonArray(): any[] | Return a simple array of arrays with the control points as [[x,y,z],[x,y,z],..] |
|
| emitStrokableParts(handler: IStrokeHandler, _options?: StrokeOptions): void | announce intervals with stroke counts | |
| emitStrokes(dest: LineString3d, options?: StrokeOptions): void | append stroke points to a linestring, based on strokeCount and fractionToPoint from derived class |
|
| endPoint(): Point3d | Return the end point. | |
| extendRange(rangeToExtend: Range3d, transform?: Transform): void Abstract | Concrete classes must implement extendRange . | |
| fractionToParentFraction(fraction: number): number | map fraction from this Bezier curves inherent 0..1 range to the (a,b) range of parent |
|
| getPolePoint3d(i: number, point?: Point3d): undefined | Point3d Abstract | Get pole i as a Point3d. |
|
| getPolePoint4d(i: number, point?: Point4d): undefined | Point4d Abstract | Get pole i as a Point4d. |
|
| isInPlane(plane: Plane3dByOriginAndUnitNormal): boolean | return true if all poles are on a plane. | |
| polygonLength(): number | Return the length of the control polygon. | |
| projectedParameterRange(ray: Ray3d | Vector3d, lowHigh?: Range1d): undefined | Range1d | Project instance geometry (via dispatch) onto the given ray, and return the extreme fractional parameters of projection. | |
| quickLength(): number | Return the control polygon length as a quick length estimate. | |
| reverseInPlace(): void | reverse the poles in place | |
| saturateInPlace(knotVector: KnotVector, spanIndex: number): boolean | saturate the pole in place, using knot intervals from spanIndex of the knotVector |
|
| setInterval(a: number, b: number): void | Set mapping to parent curve (e.g. | |
| startPoint(): Point3d | Return the start point. |
Inherited methods
| Name | Inherited from | Description |
|---|---|---|
| addMappedStrokesToLineString3D(map: StrokeCountMap, linestring: LineString3d): number | CurvePrimitive | * evaluate strokes at fractions indicated in a StrokeCountMap. |
| announceClipIntervals(_clipper: Clipper, _announce?: AnnounceNumberNumberCurvePrimitive): boolean | CurvePrimitive | Find intervals of this curvePrimitive that are interior to a clipper |
| appendPlaneIntersectionPoints(plane: PlaneAltitudeEvaluator, result: CurveLocationDetail[]): number | CurvePrimitive | Compute intersections with a plane. |
| closestPoint(spacePoint: Point3d, extend: VariantCurveExtendParameter): undefined | CurveLocationDetail | CurvePrimitive | Search for the curve point that is closest to the spacePoint. |
| collectCurvePrimitives(collectorArray?: CurvePrimitive[], smallestPossiblePrimitives: boolean = false, explodeLinestrings: boolean = false): CurvePrimitive[] | CurvePrimitive | Return an array containing only the curve primitives. |
| collectCurvePrimitivesGo(collectorArray: CurvePrimitive[], _smallestPossiblePrimitives: boolean, _explodeLinestrings: boolean = false): void | CurvePrimitive | Return an array containing only the curve primitives. |
| computeAndAttachRecursiveStrokeCounts(options?: StrokeOptions, parentMap?: StrokeCountMap): void | CurvePrimitive | attach StrokeCountMap structure to this primitive (and recursively to any children) |
| curveLength(): number | CurvePrimitive | return the length of the curve. |
| curveLengthBetweenFractions(fraction0: number, fraction1: number): number | CurvePrimitive | Returns a (high accuracy) length of the curve between fractional positions |
| curveLengthWithFixedIntervalCountQuadrature(fraction0: number, fraction1: number, numInterval: number, numGauss: number = 5): number | CurvePrimitive | * Run an integration (with a default gaussian quadrature) with a fixed fractional step |
| dispatchToGeometryHandler(handler: GeometryHandler): any Abstract | CurvePrimitive | * "double dispatch" call pattern. |
| fractionAndDistanceToPointOnTangent(fraction: number, distance: number): Point3d | CurvePrimitive | Construct a point extrapolated along tangent at fraction. |
| fractionToCurvature(fraction: number): undefined | number | CurvePrimitive | Returns the (absolute) curvature magnitude. |
| fractionToFrenetFrame(fraction: number, result?: Transform): undefined | Transform | CurvePrimitive | Construct a frenet frame: |
| fractionToPoint(fraction: number, result?: Point3d): Point3d Abstract | CurvePrimitive | Return the point (x,y,z) on the curve at fractional position. |
| fractionToPointAnd2Derivatives(fraction: number, result?: Plane3dByOriginAndVectors): undefined | Plane3dByOriginAndVectors Abstract | CurvePrimitive | Return a plane with |
| fractionToPointAndDerivative(fraction: number, result?: Ray3d): Ray3d Abstract | CurvePrimitive | Return the point (x,y,z) and derivative on the curve at fractional position. |
| fractionToPointAndUnitTangent(fraction: number, result?: Ray3d): Ray3d | CurvePrimitive | Returns a ray whose origin is the curve point and direction is the unit tangent. |
| fractionToSignedXYRadiusOfCurvature(fraction: number): number | CurvePrimitive | Construct signed distance from a point on the curve to its center of curvature (in xy only). |
| getFractionToDistanceScale(): undefined | number | CurvePrimitive | * If the curve primitive has distance-along-curve strictly proportional to curve fraction, return the scale factor. |
| isAlmostEqual(other: GeometryQuery): boolean | CurvePrimitive | test for exact structure and nearly identical geometry. |
| isSameGeometryClass(other: GeometryQuery): boolean Abstract | CurvePrimitive | test if (other instanceof this.Type). |
| moveSignedDistanceFromFraction(startFraction: number, signedDistance: number, allowExtension: boolean, result?: CurveLocationDetail): CurveLocationDetail | CurvePrimitive | * (Attempt to) find a position on the curve at a signed distance from start fraction. |
| moveSignedDistanceFromFractionGeneric(startFraction: number, signedDistance: number, allowExtension: boolean, result?: CurveLocationDetail): CurveLocationDetail Protected | CurvePrimitive | Generic algorithm to search for point at signed distance from a fractional startPoint. |
| range(transform?: Transform, result?: Range3d): Range3d | CurvePrimitive | return the range of the entire (tree) GeometryQuery |
| rangeBetweenFractions(fraction0: number, fraction1: number, transform?: Transform): Range3d | CurvePrimitive | Returns a (high accuracy) range of the curve between fractional positions |
| rangeBetweenFractionsByClone(fraction0: number, fraction1: number, transform?: Transform): Range3d | CurvePrimitive | Returns a (high accuracy) range of the curve between fractional positions |
| rangeBetweenFractionsByCount(fraction0: number, fraction1: number, count: number, transform?: Transform, extrapolationFactor: number = 0.0): Range3d | CurvePrimitive | Returns an approximate range based on a fixed number of evaluations |
| tryTransformInPlace(transform: Transform): boolean Abstract | CurvePrimitive | Attempt to transform in place. |
| tryTranslateInPlace(dx: number, dy: number = 0.0, dz: number = 0.0): boolean | CurvePrimitive | try to move the geometry by dx,dy,dz |
| areAlmostEqual(a: undefined | GeometryQuery, b: undefined | GeometryQuery): boolean Static | CurvePrimitive | apply instance method isAlmostEqual if both are defined. |
| installStrokeCountMap(curve: CurvePrimitive, curveMap: StrokeCountMap, parentMap?: StrokeCountMap): void Static | CurvePrimitive | final install step to save curveMap in curve. |
Properties
| Name | Type | Description | |
|---|---|---|---|
| _polygon Protected | Bezier1dNd | Control points | |
| _workCoffsA Protected | undefined | Float64Array | scratch array for use by derived classes, using allocateAndZeroBezierWorkData for sizing. | |
| _workCoffsB Protected | undefined | Float64Array | scratch array for use by derived classes, using allocateAndZeroBezierWorkData for sizing. | |
| _workData0 Protected | Float64Array | scratch data blocks accessible by concrete class. | |
| _workData1 Protected | Float64Array | scratch data blocks accessible by concrete class. | |
| _workPoint0 Protected | Point3d | Scratch xyz point accessible by derived classes. | |
| _workPoint1 Protected | Point3d | Scratch xyz point accessible by derived classes. | |
| curvePrimitiveType Readonly | "bezierCurve" | String name for schema properties | |
| degree Accessor ReadOnly | number | (property accessor) Return the polynomial degree (one less than order) | |
| numPoles Accessor ReadOnly | number | (property accessor) Return the number of poles (aka control points) | |
| order Accessor ReadOnly | number | (property accessor) Return the polynomial order |
Inherited properties
| Name | Type | Inherited from | Description |
|---|---|---|---|
| children Accessor ReadOnly | undefined | GeometryQuery[] | CurvePrimitive | return GeometryQuery children for recursive queries. * leaf classes do not need to implement. |
| geometryCategory Readonly | "curvePrimitive" | CurvePrimitive | String name for schema properties |
| isExtensibleFractionSpace Accessor ReadOnly | boolean | CurvePrimitive | * Returns true if the curve's fraction queries extend beyond 0..1. * Base class default implementation returns false. * These class (and perhaps others in the future) will return true: * LineSegment3d * LineString3d * Arc3d |
| parent | undefined | any | CurvePrimitive | data attached by various algorithms (e.g. |
| strokeData | undefined | StrokeCountMap | CurvePrimitive | data attached during stroking for facets. |
Defined in
- bspline/BezierCurveBase.ts Line 40
Last Updated: 20 June, 2023