EditManipulator.HandleTool Class
Interactive control handle modification is done by installing an InputCollector. Modification typically is started from a click or press and drag while over the handle graphics. The HandleTool base class is set up to define an offset by 2 points. The second point is defined by either another click, or up event when initiated from press and drag.
see EditManipulator.HandleProvider
Extends
Methods
| Name | Description | |
|---|---|---|
| constructor(manipulator: EditManipulator.HandleProvider): EditManipulator.HandleTool | ||
| accept(_ev: BeButtonEvent): boolean ProtectedAbstract | Called from data button down event to check if enough input has been gathered to complete the modification. | |
| cancel(_ev: BeButtonEvent): boolean Protected | Called from reset button up event to allow modification to be cancelled. | |
| init(): void Protected | Establish the initial tool state for handle modification. | |
| onComplete(_ev: BeButtonEvent, event: EditManipulator.EventType): Promise<EventHandled> Protected | Called following cancel or accept to update the handle provider | |
| onDataButtonDown(ev: BeButtonEvent): Promise<EventHandled> | Invoked when the data button is pressed. | |
| onPostInstall(): Promise<void> | Override to execute additional logic after tool becomes active | |
| onResetButtonUp(ev: BeButtonEvent): Promise<EventHandled> | Invoked when the reset button is released. | |
| onTouchCancel(ev: BeTouchEvent): Promise<void> | Called when a touch point is interrupted in some way and needs to be dropped from the list of target touches. | |
| onTouchComplete(ev: BeTouchEvent): Promise<void> | Called when the last touch point is removed from the surface completing the current gesture. | |
| onTouchMove(ev: BeTouchEvent): Promise<void> | Called when a touch point moves along the surface. |
Inherited methods
| Name | Inherited from | Description |
|---|---|---|
| applyToolSettingPropertyChange(_updatedValue: DialogPropertySyncItem): Promise<boolean> | InputCollector | Used to receive property changes from UI. |
| beginDynamics(): void | InputCollector | Call to initialize dynamics mode. |
| bumpToolSetting(_settingIndex?: number): Promise<boolean> | InputCollector | Used to "bump" the value of a tool setting. |
| changeLocateState(enableLocate: boolean, enableSnap?: boolean, cursor?: string, coordLockOvr?: CoordinateLockOverrides): void | InputCollector | Helper method to keep the view cursor, display of locate circle, and coordinate lock overrides consistent with AccuSnap.isLocateEnabled and AccuSnap.isSnapEnabled. |
| changeToolSettingPropertyValue(syncItem: DialogPropertySyncItem): boolean | InputCollector | Helper method for responding to a tool setting property value change by updating saved settings. |
| decorate(_context: DecorateContext): void | InputCollector | Called to allow an active tool to display non-element decorations in overlay mode. |
| decorateSuspended(_context: DecorateContext): void | InputCollector | Called to allow a suspended tool to display non-element decorations in overlay mode. |
| endDynamics(): void | InputCollector | Call to terminate dynamics mode. |
| exitTool(): Promise<void> | InputCollector | |
| filterHit(_hit: HitDetail, _out?: LocateResponse): Promise<LocateFilterStatus> | InputCollector | Invoked to allow tools to filter which elements can be located. |
| getCurrentButtonEvent(ev: BeButtonEvent): void | InputCollector | Fill the supplied button event from the current cursor location. |
| getDecorationGeometry(_hit: HitDetail): undefined | GeometryStreamProps | InputCollector | Called to allow snapping to pickable decoration geometry. |
| getToolSettingPropertyLocked(_property: DialogProperty<any>): undefined | DialogProperty<any> | InputCollector | Override to return the property that is disabled/enabled if the supplied property is a lock property. |
| getToolTip(_hit: HitDetail): Promise<string | HTMLElement> | InputCollector | Invoked before the locate tooltip is displayed to retrieve the information about the located element. |
| initLocateElements(enableLocate: boolean = true, enableSnap?: boolean, cursor?: string, coordLockOvr?: CoordinateLockOverrides): void | InputCollector | Helper method for tools that need to locate existing elements. |
| initializeToolSettingPropertyValues(properties: DialogProperty<any>[]): void | InputCollector | Helper method to establish initial values for tool setting properties from saved settings. |
| isCompatibleViewport(_vp: ScreenViewport, _isSelectedViewChange: boolean): boolean | InputCollector | |
| isValidLocation(_ev: BeButtonEvent, _isButtonEvent: boolean): boolean | InputCollector | |
| onCleanup(): Promise<void> | InputCollector | Invoked when the tool becomes no longer active, to perform additional cleanup logic |
| onDataButtonUp(_ev: BeButtonEvent): Promise<EventHandled> | InputCollector | Invoked when the data button is released. |
| onDynamicFrame(_ev: BeButtonEvent, _context: DynamicsContext): void | InputCollector | Called to allow Tool to display dynamic elements. |
| onInstall(): Promise<boolean> | InputCollector | Override to execute additional logic when tool is installed. |
| onKeyTransition(_wentDown: boolean, _keyEvent: KeyboardEvent): Promise<EventHandled> | InputCollector | Called when any key is pressed or released. |
| onMiddleButtonDown(_ev: BeButtonEvent): Promise<EventHandled> | InputCollector | Invoked when the middle mouse button is pressed. |
| onMiddleButtonUp(_ev: BeButtonEvent): Promise<EventHandled> | InputCollector | Invoked when the middle mouse button is released. |
| onModifierKeyTransition(_wentDown: boolean, _modifier: BeModifierKeys, _event: KeyboardEvent): Promise<EventHandled> | InputCollector | Called when Control, Shift, or Alt modifier keys are pressed or released. |
| onMouseEndDrag(ev: BeButtonEvent): Promise<EventHandled> | InputCollector | Invoked when the button is released after onMouseStartDrag. |
| onMouseMotion(_ev: BeButtonEvent): Promise<void> | InputCollector | Invoked when the cursor is moving |
| onMouseStartDrag(_ev: BeButtonEvent): Promise<EventHandled> | InputCollector | Invoked when the cursor begins moving while a button is depressed. |
| onMouseWheel(_ev: BeWheelEvent): Promise<EventHandled> | InputCollector | Invoked when the mouse wheel moves. |
| onReinitialize(): Promise<void> | InputCollector | Override Call to reset tool to initial state |
| onResetButtonDown(_ev: BeButtonEvent): Promise<EventHandled> | InputCollector | Invoked when the reset button is pressed. |
| onSelectedViewportChanged(_previous: undefined | ScreenViewport, _current: undefined | ScreenViewport): void | InputCollector | Called when active view changes. |
| onSuspend(): Promise<void> | InputCollector | Notification of a ViewTool or InputCollector starting and this tool is being suspended. |
| onTouchEnd(_ev: BeTouchEvent): Promise<void> | InputCollector | Called when user removes a touch point by lifting a finger or stylus from the surface. |
| onTouchMoveStart(_ev: BeTouchEvent, _startEv: BeTouchEvent): Promise<EventHandled> | InputCollector | Called after at least one touch point has moved for an appreciable time and distance along the surface to not be considered a tap. |
| onTouchStart(_ev: BeTouchEvent): Promise<void> | InputCollector | Called when user adds a touch point by placing a finger or stylus on the surface. |
| onTouchTap(_ev: BeTouchEvent): Promise<EventHandled> | InputCollector | Called when touch point(s) are added and removed from a surface within a small time window without any touch point moving. |
| onUnsuspend(): Promise<void> | InputCollector | Notification of a ViewTool or InputCollector exiting and this tool is being unsuspended. |
| parseAndRun(..._args: string[]): Promise<boolean> | InputCollector | Run this instance of a tool using a series of string arguments. |
| reloadToolSettingsProperties(): void | InputCollector | Called by tool to inform UI to reload ToolSettings with new set of properties. |
| run(..._args: any[]): Promise<boolean> | InputCollector | Run this instance of a Tool. |
| supplyToolSettingsProperties(): undefined | DialogItem[] | InputCollector | Used to supply list of properties that can be used to generate ToolSettings. |
| syncToolSettingsProperties(syncData: DialogPropertySyncItem[]): void | InputCollector | Called by tool to synchronize the UI with property changes made by tool. |
| testDecorationHit(_id: string): boolean | InputCollector | Called to support operations on pickable decorations, like snapping. |
| register(namespace?: string): void Static | InputCollector | Register this Tool class with the ToolRegistry. |
Properties
| Name | Type | Description | |
|---|---|---|---|
| hidden Static | boolean | If true, this Tool will not appear in the list from ToolRegistry.getToolList. | |
| manipulator Readonly | EditManipulator.HandleProvider | ||
| toolId Static | string | The unique string that identifies this tool. | |
| wantAccuSnap Accessor ProtectedReadOnly | boolean | Whether to call AccuSnap.enableSnap for handle modification. |
Inherited properties
| Name | Type | Inherited from | Description |
|---|---|---|---|
| description Accessor ReadOnly | string | InputCollector | Get the localized description string from this Tool's class |
| description Accessor StaticReadOnly | string | InputCollector | Get the localized description for this Tool class. This returns the value of "tools." + this.toolId + ".description" from its registered Namespace (e.g. "en/MyApp.json"). If that key is not in the localization namespace, InputCollector.flyover is returned. |
| englishKeyin Accessor StaticReadOnly | string | InputCollector | Get the English keyin string for this Tool class. This returns the value of "tools." + this.toolId + ".keyin" from its registered Namespace (e.g. "en/MyApp.json"). |
| flyover Accessor ReadOnly | string | InputCollector | Get the localized flyover string from this Tool's class |
| flyover Accessor StaticReadOnly | string | InputCollector | Get the localized flyover for this Tool class. This returns the value of "tools." + this.toolId + ".flyover" from its registered Namespace (e.g. "en/MyApp.json"). If that key is not in the localization namespace, InputCollector.keyin is returned. |
| iconSpec Accessor ReadOnly | string | InputCollector | Get the iconSpec from this Tool's class. |
| iconSpec Static | string | InputCollector | The icon for this Tool. |
| isControlDown Accessor ReadOnly | boolean | InputCollector | Convenience method to check whether control key is currently down without needing a button event. |
| isDynamicsStarted Accessor ReadOnly | boolean | InputCollector | Call to find out if dynamics are currently active. |
| keyin Accessor ReadOnly | string | InputCollector | Get the localized keyin string from this Tool's class |
| keyin Accessor StaticReadOnly | string | InputCollector | Get the localized keyin string for this Tool class. This returns the value of "tools." + this.toolId + ".keyin" from its registered Namespace (e.g. "en/MyApp.json"). |
| maxArgs Accessor StaticReadOnly | undefined | number | InputCollector | The maximum number of arguments allowed by InputCollector.parseAndRun, or undefined if there is no maximum. If subclasses override InputCollector.parseAndRun, they should also override this method to indicate the maximum number of arguments their implementation expects. |
| minArgs Accessor StaticReadOnly | number | InputCollector | The minimum number of arguments allowed by InputCollector.parseAndRun. If subclasses override InputCollector.parseAndRun, they should also override this method to indicate the minimum number of arguments their implementation expects. UI controls can use this information to ensure the tool has enough information to execute. |
| namespace Static | string | InputCollector | The namespace that provides localized strings for this Tool. |
| receivedDownEvent | boolean | InputCollector | Used to avoid sending tools up events for which they did not receive the down event. |
| toolId Accessor ReadOnly | string | InputCollector | Get the toolId string for this Tool class. This string is used to identify the Tool in the ToolRegistry and is used to localize the keyin, description, etc. from the current locale. |
Defined in
Last Updated: 20 June, 2023