Learning > ui > Augmenting U I
Edit this page

Augmenting the UI of an iTwin App

There are two basic ways to augment the UI of a host iModelApp.

The simplest way is to use one or more UiItemsProvider to provide definitions for Tool buttons, Status Bar items, Backstage items, and Widgets. In this scenario, as frontstage components are constructed at runtime, calls are made to all registered UiItemsProviders to gather item definitions to insert into the host iModelApp.

The second way is for a package to provide an entire stage definition. It is recommended that this be done using the StandardFrontstageProvider, which will provide an empty stage that can then be populated via UiItemsProviders.

A recommended technique is for a package to have an initialize() method that registers its Tools and UiItemsProvider. See this approach in example below.

  private static registerUiComponents(): void {
    SampleTool.register(MyPackage.localizationNamespace);
    GenericTool.register(MyPackage.localizationNamespace);

    // register to add items to "General" usage stages"
    UiItemsManager.register(new MyUiItemsProvider());
  }

  public static async initialize(): Promise<void> {
    if (this._initialized)
      return;

    /** Register the localized strings for this package
     * We'll pass the localization member to the rest of the classes in the package to allow them to translate strings in the UI they implement.
     */
    await IModelApp.localization.registerNamespace(MyPackage.localizationNamespace);
    this.registerUiComponents();
    this._initialized = true;
  }

Adding ToolButtons, Status Bar items, and Widgets to existing application frontstage

A UiItemsProvider is used to provide items to insert into the UI of an existing stage. When App UI is constructing the stage, item definitions are requested from all UiItemsProviders. These calls will always include the current frontstage's Id and usage. A package can use this info to determine which, if any, items to add to the stage. An application's stageId names may not be useful unless the stage names are already known to the UiItemsProvider. The stageUsage value is also provided. This string is typically set to one of the standard StageUsage enum values. Each provider also receives the stage's applicationData. This allows the frontstage to specify a list of features that it is intended to support.

One important note. When specifying an item via a UiItemsProvider please ensure that its Id is uniquely specified across all applications that may use items from the provider. One way to do this is to prefix the id with a string that represents the package. A common pattern is package-name:item-id.

Adding a ToolButton

A UiItemsProvider can return an array of CommonToolbarItem that are used when populating the four different toolbars supported by App UI. The ToolbarUsage will indicate if the toolbar is on the left (content manipulation) or right (view navigation) of the application window. The ToolbarOrientation specifies if the toolbar is horizontal or vertical. The item priority determines the order of the tool button items within a group. A group priority can optionally be defined for the tools. If the group priority is defined, tools are placed into groups with a separator displayed when the group priority changes. The default value for group priority is zero.

Below is the UiItemsProvider function called when appui-react is populating toolbars.

public provideToolbarButtonItems(stageId: string, stageUsage: string,
  toolbarUsage: ToolbarUsage, toolbarOrientation: ToolbarOrientation): CommonToolbarItem[]

Status Bar Item

A UiItemsProvider can return an array of CommonStatusBarItem to insert into the StatusBar. The item's definition includes the StatusBar section to be placed in and a priority defining its order within the section. Below is the UiItemsProvider function called when appui-react is populating the status bar footer.

public provideStatusBarItems(stageId: string, stageUsage: string): CommonStatusBarItem[]

Widget Item

The UiItemsProvider function called when appui-react is populating StagePanels is detailed below. The StagePanelLocation will be the default location for the widget. The StagePanelSection will specify what section of the panel should contain the widget. Since widgets can be moved by the user, the locations specified are only the default locations.

    provideWidgets(stageId: string, stageUsage: string, location: StagePanelLocation, section?: StagePanelSection, _zoneLocation?: AbstractZoneLocation, stageAppData?: any): ReadonlyArray<AbstractWidgetProps>;

Starting in version 2.17 Widgets can support being "popped-out" to a child window by setting the AbstractWidgetProps property canPopout to true. This option must be explicitly set because the method getWidgetContent must return React components that works properly in a child window. At minimum components should typically not use the window or document property to register listeners as these listener will be registered for events in the main window and not in the child window. Components will need to use the ownerDocument and ownerDocument.defaultView properties to retrieve document and window properties for the child window.

Below is an example of implementation of a provideWidgets method that can work in Ninezone UI (UI-1) or AppUi (UI-2).

  public provideWidgets(_stageId: string, stageUsage: string, location: StagePanelLocation, section: StagePanelSection | undefined, zoneLocation?: AbstractZoneLocation): ReadonlyArray<AbstractWidgetProps> {
    const widgets: AbstractWidgetProps[] = [];
    // `section` will be undefined if uiVersion === "1" (referred to as Ninezone UI) and in that case we can add
    // specified zoneLocation. Because the Ninezone UI also had StagePanels we must make sure we only add to stage panels if
    // the Ninezone UI is NOT active.
    if ((undefined === section && stageUsage === StageUsage.General && zoneLocation === AbstractZoneLocation.BottomRight) ||
      (stageUsage === StageUsage.General && location === StagePanelLocation.Right && section === StagePanelSection.End && "1" !== UiFramework.uiVersion)) {
      {
        widgets.push({
          id: PresentationPropertyGridWidgetControl.id,
          icon: PresentationPropertyGridWidgetControl.iconSpec,
          label: PresentationPropertyGridWidgetControl.label,
          defaultState: WidgetState.Open,
          canPopout: true,
          defaultFloatingSize={{width:330, height:540}},
          isFloatingStateWindowResizable={true},
          getWidgetContent: () => <PresentationPropertyGridWidget />,
        });
      }
    }
    return widgets;
  }
}

For newer apps that run only in AppUI then the above method can be simplified to the following.

  public provideWidgets(_stageId: string, stageUsage: string, location: StagePanelLocation, section: StagePanelSection | undefined, zoneLocation?: AbstractZoneLocation): ReadonlyArray<AbstractWidgetProps> {
    const widgets: AbstractWidgetProps[] = [];
    if (stageUsage === StageUsage.General && location === StagePanelLocation.Right && section === StagePanelSection.End) {
      {
        widgets.push({
          id: PresentationPropertyGridWidgetControl.id,
          icon: PresentationPropertyGridWidgetControl.iconSpec,
          label: PresentationPropertyGridWidgetControl.label,
          defaultState: WidgetState.Open,
          canPopout: true,
          defaultFloatingSize={{width:330, height:540}},
          isFloatingStateWindowResizable={true},
          getWidgetContent: () => <PresentationPropertyGridWidget />,
        });
      }
    }
    return widgets;
  }
}

One last thing to point out in the above example. We specified default size for the widget if it is "floated". This is sometimes required due to the specific construction of the widget component. Most components have an intrinsic size based on their contents and this size is used when the widget is floated. There are a few widget that draw directly to a canvas object or some other object that does not have an intrinsic size, and these component must have a size specified. Widgets that use the PropertyGrid and ControlledTree components are of this type and must have their sizes specified. The defaultFloatingSize prop is used to specify a default size for these widgets when they are "floated". If the prop isFloatingStateWindowResizable={true} is also specified the user is allowed to resize the widgets when floated and that stated is saved and used if the widget is floated again in the same frontstage.

UiItemProviderOverrides

When registering a UiItemsProvider with the UiItemsManager it is possible to pass an additional argument to limit when the provider is allowed to provide its items. The interface UiItemProviderOverrides defines the parameters that can be used to limit when the provider is called to provide its items.

In the example registration below the commonToolSetProvider is limited to be called to when the active stage has a StageUsage: StageUsage.General, StageUsage.Edit, or StageUsage.ViewOnly. Remember the StageUsage is defined by the FrontStageProvider that has been registered. Since we want the same provider to provide a different set of tools to different stages we assign an override providerId for this instance of the provider. This is needed since the UiItemsManager does not allow providers with duplicate Ids. The redlineToolSetProvider is then registered to show only a subset of tools when the active stage has a StageUsage of StageUsage.Redline.

const commonToolSetProvider = new StandardContentToolsUiItemsProvider();
UiItemsManager.register(commonToolSetProvider, {providerId: "general-content-tools",
 stageUsages: [StageUsage.General, StageUsage.Edit, StageUsage.ViewOnly]});

const contentToolsToShow: DefaultContentTools = {
      vertical: {
        selectElement: true,
      },
      horizontal: {
        clearSelection: true,
      },
    };
const redlineToolSetProvider = new StandardContentToolsUiItemsProvider(contentToolsToShow);
UiItemsManager.register(redlineToolSetProvider, {providerId: "redline-content-tools",
  stageUsages: [StageUsage.Redline]});

Alternately StageIds could be used to specify when the different tool set providers are used. This requires the caller the registers the UiItemsProvider to know all stageIds that are available in the application.

const commonToolSetProvider = new StandardContentToolsUiItemsProvider();
UiItemsManager.register(commonToolSetProvider, {providerId: "general-content-tools",
 stageIds: ["Main", "PlanAndProfile", "BasicEditing"]});

const contentToolsToShow: DefaultContentTools = {
      vertical: {
        selectElement: true,
      },
      horizontal: {
        clearSelection: true,
      },
    };
const redlineToolSetProvider = new StandardContentToolsUiItemsProvider(contentToolsToShow);
UiItemsManager.register(redlineToolSetProvider, {providerId: "redline-content-tools",
  stageIds: ["Markup"]});

There are three standard providers that can be used to serve as example of defining a UiItemsProvider. They are StandardContentToolsUiItemsProvider, StandardNavigationToolsUiItemsProvider, and StandardStatusbarUiItemsProvider.

BaseUiItemsProvider

Note - This class is targeted to be deprecated in favor of the less intrusive ability to specify overrides as outlined in the topic above.

The BaseUiItemsProvider implements the UiItemsProvider interface and provides the additional functionality of allowing the user of the provider to define a function that determines if the provided items are to be supplied to the active stage. The BaseUiItemsProvider is meant to be subclassed to create an items provider that supports the isSupportedStage callback function.

If developing an general purpose UiItemsProvider that may be used in multiple products or may be instantiated multiple times within a product to deliver a different set of items to different stages it is recommended that the provider be subclassed from the BaseUiItemsProvider class.

To see a more complete example of adding ToolButtons, Status Bar items, and Widgets see the UiItemsProvider example. The StandardContentToolsProvider class serves as an example of an items provider subclassed from BaseUiItemsProvider.

Adding a Frontstage

The follow example shows how to define a new stage and register it with the ConfigurableUiManager. This stage defines the content to show and leaves all the tool and status bar item specifications to standard providers. This stage could then be registered in the package's initialize method by calling MyFrontstage.register().

export class MyStageContentGroupProvider extends ContentGroupProvider {
  public async provideContentGroup(props: FrontstageProps): Promise<ContentGroup> {
    return new ContentGroup({
      id: "myPackage:my-stage-content",
      layout: StandardContentLayouts.singleView,
      contents: [
        {
          id: "primaryContent",
          classId: IModelViewportControl.id,
          applicationData: {
            isPrimaryView: true,
            supports: ["viewIdSelection", "3dModels", "2dModels"],
            viewState: UiFramework.getDefaultViewState,
            iModelConnection: UiFramework.getIModelConnection,
          },
        },
      ],
    });
  }
}

export class MyFrontstage {
  public static stageId = "myPackage:MyStageId";
  private static _contentGroupProvider = new MyStageContentGroupProvider();
  public static register() {
    const cornerButton = <BackstageAppButton icon={"icon-bentley-systems"} />;
    const myStageProps: StandardFrontstageProps = {
      id: NetworkTracingFrontstage.stageId,
      version: 1.0,  // stage version used when save stage's state
      contentGroupProps: MyFrontstage._contentGroupProvider,
      hideNavigationAid: false,
      cornerButton,
      usage: StageUsage.Private,
      applicationData: undefined,
    };

    ConfigurableUiManager.addFrontstageProvider(new StandardFrontstageProvider(myStageProps));
    MyFrontstage.registerToolProviders();
  }

  private static registerToolProviders() {

    // =============== using stage ids to filter when provider is called ===================
    const contentToolOptions = {
        horizontal: {
          clearSelection: true,
          clearDisplayOverrides: true,
          hide: "group",
          isolate: "group",
          emphasize: "element",
        },
      };

    UiItemsManager.register(new StandardContentToolsUiItemsProvider(contentToolOptions), {stageIds: ["myPackage:MyStageId", "MainStage", "IssueResolution"]});
    UiItemsManager.register(new StandardNavigationToolsUiItemsProvider(), {stageIds: ["myPackage:MyStageId", "MainStage", "IssueResolution"]});
    UiItemsManager.register(new StandardStatusbarItemsProvider(), {stageIds: ["myPackage:MyStageId", "MainStage", "IssueResolution"]});
  }
}

StateManager and ReducerRegistry

The example below shows the call that adds a Reducer to the store managed by the StateManager. This registration should be made by the package when it loads or by a package when it is initialized.

ReducerRegistryInstance.registerReducer(
  PackageStateManager._reducerName,
  PackageStateManager.reducer,
);

See complete example.

Last Updated: 20 June, 2023