BezierCurve3d Class

3d Bezier curve class.

  • Use BezierCurve3dH if the curve has weights.
  • The control points (xyz) are managed as the _packedData buffer in the _polygon member of BezierCurveBase.

Extends

Methods

Name Description
constructor(blockSize: number, data: Float64Array): BezierCurve3d Protected    
clone(): BezierCurve3d Clone as a bezier 3d.  
clonePartialCurve(f0: number, f1: number): BezierCurve3d | undefined Clone the interval from f0 to f1.  
cloneTransformed(transform: Transform): BezierCurve3d Return a curve after transform.  
copyPointsAsLineString(): LineString3d Return poles as a linestring  
dispatchToGeometryHandler(handler: GeometryHandler): any Second step of double dispatch: call handler.handleBezierCurve3d(this)  
extendRange(rangeToExtend: Range3d, transform?: Transform): void Extend rangeToExtend, using candidate extrema at  
fractionToPoint(fraction: number, result?: Point3d): Point3d Return a (de-weighted) point on the curve.  
fractionToPointAnd2Derivatives(fraction: number, result?: Plane3dByOriginAndVectors): Plane3dByOriginAndVectors Construct a plane with  
fractionToPointAndDerivative(fraction: number, result?: Ray3d): Ray3d Return the cartesian point and derivative vector.  
getPolePoint3d(i: number, result?: Point3d): Point3d | undefined Return a specific pole as a full [x,y,z] Point3d  
getPolePoint4d(i: number, result?: Point4d): Point4d | undefined Return a specific pole as a full [w*x,w*y,w*z, w] Point4d  
isAlmostEqual(other: any): boolean Near-equality test on poles.  
isSameGeometryClass(other: any): boolean test if other is also a BezierCurve3d.  
loadSpanPoles(data: Float64Array, spanIndex: number): void Load order * 3 doubles from data[3 * spanIndex] as poles  
tryTransformInPlace(transform: Transform): boolean apply the transform to the control points.  
create(data: Point3d[] | Point2d[]): BezierCurve3d | undefined Static Create a curve with given points.  
createOrder(order: number): BezierCurve3d Static create a bezier curve of specified order, filled with zeros  

Inherited methods

Name Inherited from Description
addMappedStrokesToLineString3D(map: StrokeCountMap, linestring: LineString3d): number CurvePrimitive * evaluate strokes at fractions indicated in a StrokeCountMap.
allocateAndZeroBezierWorkData(primaryBezierOrder: number, orderA: number, orderB: number): void Protected BezierCurveBase set up the _workBezier members with specific order.
announceClipIntervals(_clipper: Clipper, _announce?: AnnounceNumberNumberCurvePrimitive): boolean CurvePrimitive Find intervals of this curvePrimitive that are interior to a clipper
appendPlaneIntersectionPoints(plane: PlaneAltitudeEvaluator, result: CurveLocationDetail[]): number CurvePrimitive Compute intersections with a plane.
closestPoint(spacePoint: Point3d, extend: VariantCurveExtendParameter): CurveLocationDetail | undefined CurvePrimitive Search for the curve point that is closest to the spacePoint.
collectCurvePrimitives(collectorArray?: CurvePrimitive[], smallestPossiblePrimitives: boolean = false): CurvePrimitive[] CurvePrimitive Return an array containing only the curve primitives.
collectCurvePrimitivesGo(collectorArray: CurvePrimitive[], _smallestPossiblePrimitives: boolean): void CurvePrimitive Return an array containing only the curve primitives.
computeAndAttachRecursiveStrokeCounts(options?: StrokeOptions, parentMap?: StrokeCountMap): void CurvePrimitive attach StrokeCountMap structure to this primitive (and recursively to any children)
computeStrokeCountForOptions(options?: StrokeOptions): number BezierCurveBase Assess length and turn to determine a stroke count.
copyPolesAsJsonArray(): any[] BezierCurveBase Return a simple array of arrays with the control points as [[x,y,z],[x,y,z],..]
curveLength(): number CurvePrimitive return the length of the curve.
curveLengthBetweenFractions(fraction0: number, fraction1: number): number CurvePrimitive Returns a (high accuracy) length of the curve between fractional positions
curveLengthWithFixedIntervalCountQuadrature(fraction0: number, fraction1: number, numInterval: number, numGauss: number = 5): number CurvePrimitive * Run an integration (with a default gaussian quadrature) with a fixed fractional step
emitStrokableParts(handler: IStrokeHandler, _options?: StrokeOptions): void BezierCurveBase announce intervals with stroke counts
emitStrokes(dest: LineString3d, options?: StrokeOptions): void BezierCurveBase append stroke points to a linestring, based on strokeCount and fractionToPoint from derived class
endPoint(): Point3d BezierCurveBase Return the end point.
fractionAndDistanceToPointOnTangent(fraction: number, distance: number): Point3d CurvePrimitive Construct a point extrapolated along tangent at fraction.
fractionToFrenetFrame(fraction: number, result?: Transform): Transform | undefined CurvePrimitive Construct a frenet frame:
fractionToParentFraction(fraction: number): number BezierCurveBase map fraction from this Bezier curves inherent 0..1 range to the (a,b) range of parent
fractionToPointAndUnitTangent(fraction: number, result?: Ray3d): Ray3d CurvePrimitive Returns a ray whose origin is the curve point and direction is the unit tangent.
getFractionToDistanceScale(): number | undefined CurvePrimitive * If the curve primitive has distance-along-curve strictly proportional to curve fraction, return true
isInPlane(plane: Plane3dByOriginAndUnitNormal): boolean BezierCurveBase return true if all poles are on a plane.
moveSignedDistanceFromFraction(startFraction: number, signedDistance: number, allowExtension: boolean, result?: CurveLocationDetail): CurveLocationDetail CurvePrimitive * (Attempt to) find a position on the curve at a signed distance from start fraction.
moveSignedDistanceFromFractionGeneric(startFraction: number, signedDistance: number, allowExtension: boolean, result?: CurveLocationDetail): CurveLocationDetail Protected CurvePrimitive Generic algorithm to search for point at signed distance from a fractional startPoint.
polygonLength(): number BezierCurveBase Return the length of the control polygon.
quickLength(): number BezierCurveBase Return the control polygon length as a quick length estimate.
range(transform?: Transform, result?: Range3d): Range3d GeometryQuery return the range of the entire (tree) GeometryQuery
reverseInPlace(): void BezierCurveBase reverse the poles in place
saturateInPlace(knotVector: KnotVector, spanIndex: number): boolean BezierCurveBase saturate the pole in place, using knot intervals from spanIndex of the knotVector
setInterval(a: number, b: number): void BezierCurveBase Set mapping to parent curve (e.g.
startPoint(): Point3d BezierCurveBase Return the start point.
tryTranslateInPlace(dx: number, dy: number = 0, dz: number = 0): boolean GeometryQuery try to move the geometry by dx,dy,dz
installStrokeCountMap(curve: CurvePrimitive, curveMap: StrokeCountMap, parentMap?: StrokeCountMap): void Static CurvePrimitive final install step to save curveMap in curve.

Inherited properties

Name Type Inherited from Description
_polygon Protected Bezier1dNd BezierCurveBase Control points
_workCoffsA Protected undefined | Float64Array BezierCurveBase scratch array for use by derived classes, using allocateAndZeroBezierWorkData for sizing.
_workCoffsB Protected undefined | Float64Array BezierCurveBase scratch array for use by derived classes, using allocateAndZeroBezierWorkData for sizing.
_workData0 Protected Float64Array BezierCurveBase scratch data blocks accessible by concrete class.
_workData1 Protected Float64Array BezierCurveBase scratch data blocks accessible by concrete class.
_workPoint0 Protected Point3d BezierCurveBase Scratch xyz point accessible by derived classes.
_workPoint1 Protected Point3d BezierCurveBase Scratch xyz point accessible by derived classes.
children Accessor ReadOnly GeometryQuery[] | undefined GeometryQuery return GeometryQuery children for recursive queries.

* leaf classes do not need to implement.
curvePrimitiveType "bezierCurve" = "bezierCurve" BezierCurveBase String name for schema properties
degree Accessor ReadOnly number BezierCurveBase (property accessor) Return the polynomial degree (one less than order)
geometryCategory "curvePrimitive" = "curvePrimitive" CurvePrimitive String name for schema properties
isExtensibleFractionSpace Accessor ReadOnly boolean CurvePrimitive * Returns true if the curve's fraction queries extend beyond 0..1.
* Base class default implementation returns false.
* These class (and perhaps others in the future) will return true:
* LineSegment3d
* LineString3d
* Arc3d
numPoles Accessor ReadOnly number BezierCurveBase (property accessor) Return the number of poles (aka control points)
order Accessor ReadOnly number BezierCurveBase (property accessor) Return the polynomial order
strokeData undefined | StrokeCountMap CurvePrimitive data attached during stroking for facets.

Defined in

Last Updated: 13 June, 2024